Home/Optical transceivers/400G QSFP-DD SR8

WincoTek 400G QSFP-DD SR8 100 m Transceiver(WTQD400-SR8-100C)

WTQD400-SR8-100C is a 400G QSFP-DD SR8 transceiver for multimode links up to 100 m on OM4. It runs eight 850 nm optical lanes at 26.5625 GBd PAM4, matching the eight-lane 400GAUI-8 host interface one to one, on a single MPO-16 APC connector. It is used for 400GBASE-SR8 switch and server links inside data center rows.

WincoTek 400G QSFP-DD SR8 transceiver
Data rate
425 Gb/s
Reach
100 m OM4
Wavelength
850 nm
Connector
MPO-16 APC
Key specifications

400G QSFP-DD SR8 at a glance.

Main optical, electrical and environmental values for WTQD400-SR8-100C.

ParameterValue
Ordering codeWTQD400-SR8-100C: 425 Gb/s, 850 nm, 100 m OM4, multimode, DDM, MPO-16, 0 to 70 °C
Data rate400 Gb/s aggregate (425 Gb/s line); 8 × 26.5625 GBd PAM4 lanes
Application400GBASE-SR8 400G Ethernet
Electrical interface8 × 26.5625 GBd PAM4
Wavelength840 to 860 nm
TX power, each lane (avg.)−6.5 to 4 dBm; OMAouter −4.5 to 3 dBm
RX sensitivity (OMAouter), each lane−6.5 dBm (SECQ = 1.4 dB); stressed sensitivity −3 dBm
RX average receive power, each lane−8.4 to 4 dBm; damage threshold 5 dBm
ReachUp to 100 m on OM4 multimode fiber
ConnectorMPO-16 (APC)
Power<12 W
SupplySingle +3.3 V (3.13 to 3.47 V)
Case temperature0 to 70 °C
DDMYes, digital diagnostic monitoring interface
EnvironmentalRoHS-6 compliant and lead-free

Main values for WTQD400-SR8-100C. Full WincoTek datasheet: DatasheetPDF

Typical applications

Where it is used.

From the datasheet application list and common network use.

  • 400GBASE-SR8 links between leaf and spine switches in the same row
  • Top-of-rack to server and storage links up to 100 m
  • AI and HPC cluster interconnects on existing OM4 cabling
Selection notes

Eight lanes on one connector.

When SR8 is the right 400G multimode choice.

SR8 keeps eight optical lanes at the same rate as the host electrical lanes, so the module needs no lane conversion. The cost is fiber count: one 16-fiber MPO per port, against 12-fiber MPO for 400G SR4 types.

MPO-16 and MPO-12 use different ferrules and are not interchangeable. Order MPO-16 trunks or cassettes with APC end-faces, and check pin type and key orientation against your patch panels.

Reach is specified on OM4 up to 100 m. If the run is longer, or the hall is wired with single-mode fiber, look at a 400G DR4 instead.

How it compares

Related WincoTek models.

Multimode options from 200G to 800G. Choose by host form factor, run length and the MPO type already in your patch field.

ModelTypeReach (multimode)ConnectorMax. power
WTQP200-SR4
DatasheetPDF
200G QSFP56 SR470 m OM3 / 100 m OM4MPO-12 (APC)<6 W
WTQ112400-SR4-50C
DatasheetPDF
400G QSFP112 SR450 mMPO-12 (APC)<8 W
WTOS400-SR4-100C
DatasheetPDF
400G OSFP SR460 m OM3 / 100 m OM4MPO-12 (APC)<8 W
WTQD400-SR8-100C
this page
DatasheetPDF
400G QSFP-DD SR8100 m OM4MPO-16 (APC)<12 W
WTOS800-SR8-100C
DatasheetPDF
800G OSFP SR860 m OM3 / 100 m OM42× MPO-12 / MPO-16 (APC)<14 W

Full range and all datasheets: optical transceivers.

Coding, quality, warranty

Coded to your host, tested first.

Host vendor names describe the target platform only.

Coding & compatibility

WTQD400-SR8-100C is coded for the host platform you name, for example Cisco, Juniper, Huawei, Arista, Nokia switches and routers. We read and back up the module data, write the approved profile, then read back and verify it with DDM. Compatibility is validated per host model and software release, so we recommend testing coded samples on your equipment before a volume order.

Quality & warranty

Built in ISO 9001-certified manufacturing partners. CE, RoHS, FCC and TÜV test reports are available for each model on request.

Warranty: hardware 3 years, software 1 year.

FAQ

Questions on this model.

Not answered here? Email waley@wincoteknetwork.com or message us on WhatsApp.

Which fiber and connector does WTQD400-SR8-100C need?

OM4 multimode fiber up to 100 m, terminated with one MPO-16 connector with APC end-face.

How does SR8 differ from 400G SR4?

SR8 uses eight 850 nm lanes at 26.5625 GBd on a 16-fiber MPO. 400G SR4 types such as WTQ112400-SR4-50C or WTOS400-SR4-100C use four faster lanes on a 12-fiber MPO.

What power and temperature apply?

Under 12 W from a single +3.3 V supply, with a 0 to 70 °C case temperature.

Does it report diagnostics?

Yes. The module supports a digital diagnostic monitoring interface for temperature, voltage, bias and optical power readings.

Can WTQD400-SR8-100C be coded for our switches?

Yes. WTQD400-SR8-100C is coded for the host platform you name, then read back and verified. Compatibility is validated per host model and software release, so test coded samples before a volume order.

Request a quote for WTQD400-SR8-100C.

Send the host model and software release, quantity and coding needs. We reply with a matched P/N and sample plan.

Email waley@wincoteknetwork.com · WhatsApp / phone +86 176 8896 6828

WhatsApp