Home/Optical transceivers/200G QSFP56 SR4

WincoTek 200G QSFP56 SR4 100 m Transceiver(WTQP200-SR4)

WTQP200-SR4 is a 200G QSFP56 SR4 transceiver for multimode links up to 70 m on OM3 or 100 m on OM4, with FEC. It runs four parallel 850 nm lanes at 26.5625 GBd PAM4 behind a 200GAUI-4 electrical interface, on an MPO-12 APC connector. It is used for 200GBASE-SR4 links between switches and servers in data centers.

WincoTek 200G QSFP56 SR4 transceiver
Data rate
200 Gb/s (4 × 53.125 Gb/s)
Reach
70 m OM3 / 100 m OM4
Wavelength
850 nm
Connector
MPO-12 APC
Key specifications

200G QSFP56 SR4 at a glance.

Main optical, electrical and environmental values for WTQP200-SR4.

ParameterValue
Ordering codeWTQP200-SR4: 200G (4 × 53.125 Gb/s), multimode, 70 m OM3 / 100 m OM4 with FEC, 0 to 70 °C
Data rate4 × 53.125 Gb/s; 26.5625 GBd PAM4 per lane
Standards200G-SR4 optical (IEEE 802.3cd); 200GAUI-4 electrical; SFF-8636
Wavelength840 to 860 nm
TX power, each lane (avg.)−6.5 to 4 dBm; OMAouter −4.5 to 3 dBm
RX sensitivity (OMAouter), each laneMax(−6.5, SECQ − 7.9) dBm; stressed sensitivity −3.4 dBm
RX average receive power, each lane−8.4 to 4 dBm; damage threshold 5 dBm
Reach70 m on OM3, 100 m on OM4 multimode fiber, with FEC
ConnectorMPO-12 (APC)
Power<6 W
SupplySingle +3.3 V (3.135 to 3.465 V)
Case temperature0 to 70 °C
DDMYes
EnvironmentalRoHS compliant

Main values for WTQP200-SR4. Full WincoTek datasheet: DatasheetPDF

Typical applications

Where it is used.

From the datasheet application list and common network use.

  • 200GBASE-SR4 Ethernet links in data centers
  • Leaf to spine and top-of-rack links up to 100 m on OM4
  • Server and storage uplinks on existing parallel multimode cabling
Selection notes

OM3 or OM4 for 200G?

Run length decides the fiber grade.

Both OM3 and OM4 are laser-optimized 50/125 µm multimode fibers built for 850 nm, but OM4 has 4700 MHz·km of effective modal bandwidth against 2000 MHz·km for OM3. For this module that is 70 m on OM3 and 100 m on OM4.

Jacket colour does not reliably tell the grade, so check the cable marking or records. If every run is under 70 m, OM3 is enough; OM4 buys headroom to 100 m.

The reach figures assume FEC on the host. Enable it on both ends, and use 12-fiber MPO cabling with APC end-faces.

How it compares

Related WincoTek models.

Multimode options from 200G to 800G. Choose by host form factor, run length and the MPO type already in your patch field.

ModelTypeReach (multimode)ConnectorMax. power
WTQP200-SR4
this page
DatasheetPDF
200G QSFP56 SR470 m OM3 / 100 m OM4MPO-12 (APC)<6 W
WTQ112400-SR4-50C
DatasheetPDF
400G QSFP112 SR450 mMPO-12 (APC)<8 W
WTOS400-SR4-100C
DatasheetPDF
400G OSFP SR460 m OM3 / 100 m OM4MPO-12 (APC)<8 W
WTQD400-SR8-100C
DatasheetPDF
400G QSFP-DD SR8100 m OM4MPO-16 (APC)<12 W
WTOS800-SR8-100C
DatasheetPDF
800G OSFP SR860 m OM3 / 100 m OM42× MPO-12 / MPO-16 (APC)<14 W

Full range and all datasheets: optical transceivers.

Coding, quality, warranty

Coded to your host, tested first.

Host vendor names describe the target platform only.

Coding & compatibility

WTQP200-SR4 is coded for the host platform you name, for example Cisco, Juniper, Huawei, Arista, Nokia switches and routers. We read and back up the module data, write the approved profile, then read back and verify it with DDM. Compatibility is validated per host model and software release, so we recommend testing coded samples on your equipment before a volume order.

Quality & warranty

Built in ISO 9001-certified manufacturing partners. CE, RoHS, FCC and TÜV test reports are available for each model on request.

Warranty: hardware 3 years, software 1 year.

FAQ

Questions on this model.

Not answered here? Email waley@wincoteknetwork.com or message us on WhatsApp.

How far does WTQP200-SR4 reach?

Up to 70 m on OM3 and 100 m on OM4 multimode fiber, with FEC on the host.

Which connector does it use?

One MPO-12 connector with APC end-face. Four fibers transmit and four receive.

Which standards does it follow?

200G-SR4 optical specifications (IEEE 802.3cd), a 200GAUI-4 electrical interface and SFF-8636 management.

What power and temperature apply?

Under 6 W from a single +3.3 V supply, 0 to 70 °C case temperature.

Can WTQP200-SR4 be coded for our switches?

Yes. WTQP200-SR4 is coded for the host platform you name, then read back and verified. Compatibility is validated per host model and software release, so test coded samples before a volume order.

Request a quote for WTQP200-SR4.

Send the host model and software release, quantity and coding needs. We reply with a matched P/N and sample plan.

Email waley@wincoteknetwork.com · WhatsApp / phone +86 176 8896 6828

WhatsApp