Coded for your host.Confirmed before you order.

Every transceiver we supply is matched to the equipment it will run in. We code modules to the required host profile, verify the result and test coded samples with you before volume supply.

WincoTek QSFP optical transceiver
Coding range
SFP–OSFP
Workflow
Read · write · verify
Validation
Per model + firmware
Warranty
HW 3 yr · SW 1 yr
Host platforms

Proven on the platforms carriers run.

Host platforms our modules have been deployed with in carrier projects. Vendor names identify the target equipment only.

Huawei

IP core & metro

NE5000, NE40E-X3A, CX600-X16

Huawei

Transport / PTN

OSN7500, OSN550

Nokia

DWDM

1830 DWDM platform

Alcatel-Lucent

PTN

1850 TSS-320, TSS-5R, TSS-5C, TSS-160

Alcatel-Lucent

DWDM

1830 PSS (MDO)

Your platform

Not listed?

Send us the model →

Validated per model and firmware; send your host list to confirm before ordering. WincoTek is an independent supplier; listing a platform does not imply any partnership with, or authorisation by, its manufacturer.

Coding service

One coding box, SFP to OSFP.

We adapt supported modules to the required host profile, including when project needs change, and verify every write. Compatibility is always confirmed on the target equipment.

WincoTek coding box with SFP, QSFP and OSFP module ports and USB Type-C
WincoTek coding box. SFP, QSFP and OSFP ports on one board, connected over USB Type-C.
WincoTek coding box clear enclosure
Desktop unit. Compact clear enclosure for bench coding, read-back and DDM checks.
SFP family
SFP / SFP+ / SFP28 / SFP56
QSFP family
QSFP+ / QSFP28 / QSFP-DD
High speed
OSFP
Interface
USB Type-C · EEPROM · DDM
01

Read & back up

Read module identity and EEPROM data, and save the original BIN.

02

Load & program

Apply the approved coding profile for your host platform.

03

Read back

Verify the programmed data, plus DDM: temperature, voltage, bias and Tx/Rx power.

04

Validate the link

Confirm operation on the target host before volume supply.

Your identity in the host

Vendor, part number and serial-number fields can be customised for supported modules, so modules appear in your host as your project requires.

Controlled changes

Tool, profile, recovery method and responsible operator are agreed before any change. Exact support for a module depends on profile access and USB power limits.

Coding confirms the programmed identity. Optical performance and host interoperability are confirmed in the link evaluation.

Samples & POC

Test on your host, then order.

Start with a focused product list and one representative host configuration. Sample scope and test criteria are agreed before testing begins.

01

Send your host list

Device model, software version, port type and the modules you need.

02

Coded samples

We match part numbers and code identified samples to your host profile.

03

Test on your host

You test against the agreed criteria; logs and any issues are recorded and reviewed together.

04

Order

Confirmed part numbers, coding, quantity and quotation for supply.

Recorded at order release

  • Part number and revision, host coding, operating range and optical interface
  • Required documentation, with the sample approval reference kept with the order
  • A different host, software release or material product change may require another evaluation
What to send

Four details start every check.

The more precisely the host is identified, the faster we confirm the match. Add the module details if you already know them.

01
Device model

Manufacturer, chassis and line card

02
Software version

Release running on the host

03
Port type

Cage, rate and port mode

04
Quantity

Per part number

ProductAlso include
Optical modulesSpeed, form factor, fiber type, wavelength, connector, reach and temperature grade
AOC / DACBoth ends and cable length
GPON OLT SFPOLT model and required optical power class
Labels & cartons

Artwork and packing, approved per order.

Product labels, packing and master cartons are confirmed against the order before production, with the same line item and part number across quotation, artwork and packing list.

Product label

  • Brand and part number: WincoTek or the agreed customer brand; exact product code and revision
  • Technical text: speed, wavelengths, connector, reach or power class and temperature grade, consistent with the datasheet
  • Size and position: label dimensions, placement, orientation, material and print method
  • Barcode and serial: symbology, encoded fields, serial format and duplicate prevention
  • Markings: only the markings authorised for the exact supplied product

Packing and master carton

  • Unit packing: ESD protection, dust caps, tray or bag type and accessories
  • Inner packing: units per tray or box, inner label, serial or lot traceability
  • Master carton: boxes and units per carton, dimensions, cushioning and sealing
  • Carton label: brand, order reference, part number, quantity, carton number, gross / net weight
  • Shipping marks: consignee or project reference and handling marks

The approved artwork revision and packing sample, where applicable, are recorded before production. Final carton weights and dimensions follow the actual packed shipment.

Warranty & RMA

Hardware 3 years. Software 1 year.

Coverage, remedies and RMA terms for each order follow the quotation or contract. Support starts with remote troubleshooting.

01

Contact us

Order reference, part number, serial number, fault description, first observed time, quantity affected.

02

Remote troubleshooting

Host model and software version, alarms, module diagnostics, port configuration and test logs.

03

RMA authorisation

Request an RMA reference before shipping; confirm return address, accepted units and packing instructions.

04

Return & review

Keep original labels intact, protect optical ports with dust caps and ESD packing, and quote the RMA reference.

An RMA request or number does not by itself confirm warranty eligibility or a repair outcome. For link issues, include far-end device, fiber and connector type, route length and power readings.

FAQ

Compatibility questions.

Not answered here? Email us your host details and we reply with a matched part number and sample plan.

Which host platforms are your modules compatible with?

Our modules have been deployed in carrier projects with the platforms listed on this page: Huawei NE5000, NE40E-X3A, CX600-X16, OSN7500 and OSN550; Nokia 1830 DWDM; Alcatel-Lucent 1850 TSS-320, TSS-5R, TSS-5C, TSS-160 and 1830 PSS (MDO). Validated per model and firmware; send your host list to confirm before ordering.

Does coding a module guarantee it will work in my host?

No. Coding confirms the programmed identity of the module. Optical performance and host interoperability are confirmed in a link evaluation on the target equipment, which is why we recommend coded samples before a volume order.

Which module types can the coding box handle?

SFP, SFP+, SFP28 and SFP56; QSFP+, QSFP28 and QSFP-DD; and OSFP, over a USB Type-C connection with EEPROM read/write and DDM. Exact support for a given module depends on profile access and USB power limits.

Is the original module data kept?

Yes. The original module data is read and saved as a BIN file before any coding file is loaded, and the result is read back after writing.

If we change software release, do the modules need to be re-tested?

Possibly. The approved configuration is recorded against the host and software you tested with. A different host, software release or material product change may require another evaluation.

Can the modules carry our own brand?

Vendor, part number and serial-number fields can be customised for supported modules, and the product label can show WincoTek or an agreed customer brand. Label artwork, barcode and carton details are approved per order before production.

What is the warranty?

Hardware 3 years, software 1 year. Coverage, remedies and RMA terms for each order follow the quotation or contract.

What should we send if a module has an issue?

The order reference, part number and serial number, a description of the fault and when it was first observed, the quantity affected, and the host model with software version. Alarms, module diagnostics, port configuration and test logs help us resolve it remotely first. Request an RMA reference before returning any unit.

Send the device model, software version, port type and quantity.

We confirm the match, propose part numbers and arrange coded samples for testing on your host.

WhatsApp