Home/Optical transceivers/400G QSFP-DD FR4

WincoTek 400G QSFP-DD FR4 2 km Transceiver(WTQD400-FR4)

WTQD400-FR4 is a 400G QSFP-DD FR4 transceiver for links up to 2 km over single-mode fiber. It carries four 53.125 GBd PAM4 lanes at 1310 nm on one duplex LC fiber pair and is compliant with 400GBASE-FR4 (IEEE 802.3cu). It is used for data center, cloud and HPC switch interconnects.

WincoTek 400G QSFP-DD FR4 transceiver
Data rate
400 Gb/s
Reach
2 km SMF
Wavelength
1310 nm
Connector
Duplex LC
Key specifications

400G QSFP-DD FR4 at a glance.

Main optical, electrical and environmental values for WTQD400-FR4.

ParameterValue
Ordering codeWTQD400-FR4 (400GBASE-FR4, EML, SMF, 0 to 70 °C)
Data rate400 Gb/s; 4 × 53.125 GBd PAM4 optical lanes
Standards400GBASE-FR4 (IEEE 802.3cu); IEEE 802.3bs 400GAUI-8 electrical interface; QSFP-DD MSA HW Rev 5.1; QSFP-DD CMIS Rev 5.0
Wavelength1310 nm
TX power, each lane (avg.)−3.2 to 4.4 dBm
RX sensitivity (OMAouter), each lane−4.6 dBm for TECQ <1.4 dB; −6 + TECQ for 1.4 ≤ TECQ ≤ 3.4 dB
RX average receive power, each lane−7.2 to 4.4 dBm; damage threshold 5.4 dBm
Operating distance2 m to 2 km
ConnectorDuplex LC, type 2 housing
Power<12 W
Case temperature0 to 70 °C
DDMYes: temperature, voltage, TX bias, TX and RX power per lane (two-wire serial interface)
EnvironmentalComplies with EU Directive 2011/65/EU; RoHS; class 1 laser

Main values for WTQD400-FR4. Full WincoTek datasheet: DatasheetPDF

Typical applications

Where it is used.

From the datasheet application list and common network use.

  • High-performance computing interconnect
  • Data center leaf-spine links up to 2 km
  • Cloud network switch-to-switch links
How it compares

Related WincoTek models.

400G QSFP-DD single-mode options. FR4 uses one duplex LC pair; DR4 and 4×LR1 use parallel MPO-12 and can break out to 4×100G.

ModelTypeReachOpticsConnectorMax. power
WTQD400-DR4
DatasheetPDF
400G DR4 (4×100G DR breakout)500 m4 parallel lanes, 1304.5–1317.5 nmMPO-12, 8° angled (APC)8 W (datasheet target)
WTQD400-FR4
this page
DatasheetPDF
400GBASE-FR42 km4 lanes at 1310 nm on one fiber pairDuplex LC<12 W
WTQD400-DR4-10
DatasheetPDF
4×100GBASE-LR1 (breakout)10 km4 parallel lanes, 1304.5–1317.5 nmMPO-12 (APC)<8 W
WTQD400-LR4
DatasheetPDF
400G-LR410 kmLAN-WDMDuplex LC<12 W

Full range and all datasheets: optical transceivers.

Coding, quality, warranty

Coded to your host, tested first.

Host vendor names describe the target platform only.

Coding & compatibility

WTQD400-FR4 is coded for the host platform you name, for example Cisco, Juniper, Huawei, Arista, Nokia switches and routers. We read and back up the module data, write the approved profile, then read back and verify it with DDM. Compatibility is validated per host model and software release, so we recommend testing coded samples on your equipment before a volume order.

Quality & warranty

Built in ISO 9001-certified manufacturing partners. CE, RoHS, FCC and TÜV test reports are available for each model on request.

Warranty: hardware 3 years, software 1 year.

FAQ

Questions on this model.

Not answered here? Email waley@wincoteknetwork.com or message us on WhatsApp.

What is the difference between 400G FR4 and DR4?

FR4 (WTQD400-FR4) runs four 1310 nm PAM4 lanes on one duplex LC fiber pair for up to 2 km. DR4 (WTQD400-DR4) uses four parallel lanes on an MPO-12 APC connector for up to 500 m and can break out to 4×100G.

Which standards does WTQD400-FR4 meet?

400GBASE-FR4 (IEEE 802.3cu), the IEEE 802.3bs 400GAUI-8 electrical interface, QSFP-DD MSA HW Rev 5.1 and QSFP-DD CMIS Rev 5.0, per the datasheet.

How much power does it use?

Under 12 W. Check the host port power class.

What is the minimum link length?

The datasheet gives an operating distance of 2 m to 2 km on single-mode fiber.

Can it be coded for our switches?

Yes. WTQD400-FR4 is coded for the host platform you name and verified before shipping. Test coded samples before a volume order.

Request a quote for WTQD400-FR4.

Send the host model and software release, quantity and coding needs. We reply with a matched P/N and sample plan.

Email waley@wincoteknetwork.com · WhatsApp / phone +86 176 8896 6828

WhatsApp