Home/Data center/Micro-modular & edge

Micro-modular and edgedata centers.

A complete computer room, from one cabinet to a 48-cabinet module. IT racks, UPS, precision cooling, power distribution, containment, fire protection and monitoring are pre-integrated at the factory for plug-and-play deployment.

WincoTek WT-MMDC micro-modular data center with aisle containment
Warrior
1 cabinet
Wizard
Up to 1+9
WT-MMDC
≤48 cabinets
IT load
≤125 kW / module
Range

Three formats, one way of working.

Every unit is designed, integrated and tested before it leaves the factory, then installed and commissioned on site. No separate power room, cooling plant or monitoring build-out to coordinate.

WincoTek Warrior edge micro data center cabinet
Edge · single cabinet

Warrior

UPS 3–10 kVA · AC 3.5–8.1 kW

UPS and batteries, precision cooling, power distribution, monitoring, fire suppression and access control in one enclosure. Deployment time cut by up to 70%.

Warrior specifications →
WincoTek Wizard micro data center cabinet row
Micro · cabinet row

Wizard

1+1 to 1+9 · UPS 10–30 kVA

One integrated power and cooling cabinet plus up to nine IT racks, with enclosed aisle containment. On-site installation in ≤1 day.

Wizard specifications →
WincoTek WT-MMDC micro-modular data center
Modular · contained rows

WT-MMDC

≤24 / ≤48 cabinets · UPS 25–125 kVA

Single or double channel modules with in-row cooling, smart power distribution and DCIM. Deployment time reduced by up to 50%.

WT-MMDC specifications →

At a glance

ProductFormatPowerCoolingFire / monitoring
Warrior1 cabinet, 600/800 mm wideUPS 3 / 6 / 10 kVA, on-lineRack AC 3.5 / 4.2 / 8.1 kWFM200 / Novec 1230; touch screen, web, email alerts
Wizard1+1 to 1+9 cabinets, 42U / 47UUPS 10–30 kVA; N, N+1, 2NRack-mounted or in-row, contained aisleGas suppression; web and mobile monitoring
WT-MMDC≤24 cabinets single, ≤48 double channelUPS 25–125 kVA, ≥96%; ≤125 kW / moduleIn-row AC 25–60 kW; DX, chilled or cooling waterFM-200 & intelligent detection; DCIM
WT-MMDC Series

Micro-modular rows, fully contained.

IT racks, UPS, precision cooling, intelligent power distribution, containment, fire protection, security access and monitoring in one unified architecture, for rapid deployment and scalable expansion.

IT rack systemUPS & batteryPrecision coolingSmart power distributionHot / cold aisle containmentFire suppressionIntelligent monitoringAccess control
ItemSpecification
ModelWT-MMDC-S (single channel) / WT-MMDC-D (double channel)
Micro module: dimensions, single channelWith aisle containment: L × 2,200 × 2,300 mm, L × 2,200 × 2,400 mm, L × 2,400 × 2,300 mm, L × 2,400 × 2,400 mm
Micro module: dimensions, double channelWith aisle containment: L × 3,200 × 2,300 mm, L × 3,200 × 2,400 mm, L × 3,600 × 2,300 mm, L × 3,600 × 2,400 mm
Micro module: cabinetsSingle channel ≤ 24 cabinets; dual channel ≤ 48 cabinets
Micro module: power supply208/380/400/415 V DC/AC, 50/60 Hz, 3 Ph + N + PE
Micro module: max IT load125 kW per module (with integrated UPS) / 145 kW (with integrated PDU)
Micro module: cabling and installationCable routing top or bottom; installation on raised floor
Cabinet enclosure2,000/2,200 mm × 600/800 mm × 1,200/1,100 mm (H × W × D); 42U / 47U; IP20
Air conditionerIn-row or vertical direction of one end; DX, chilled water, or cooling water system
In-row air conditionerCooling capacity 25 kW, 35 kW, 40 kW, 50 kW, 60 kW; H 2,000 mm 2,000 mm × 300/600 mm × D;times; W 300/600 mm, depth per model; 208–415 V AC, 50/60 Hz, 3 Ph + N + PE; R410A, R407C
Integrated UPSRated capacity 25 kVA – 125 kVA; efficiency ≥ 96%; input 208/380/400/415 V AC, MCCB 250 A / 400 A; input PF full load > 0.99, half load > 0.98; output PF 0.9 / 1.0
Integrated UPS: outputsIT: 40 A / 1P × 24 × 2; A/C: 40 A or 63 A / 3P × 8; lighting: 10 A / 1P × 3
Integrated power distribution cabinetInput 380/400/415 V AC; MCCB IT 160 A / 250 A, A/C 160 A / 250 A; outputs IT 32 A / 1P, 40 A / 1P, 63 A / 1P, 32 A / 3P; A/C 40 A or 63 A / 3P
Precision power distribution cabinetInput 208/380/400/415 V AC; MCCB 160 A / 250 A / 400 A; output 32 A / 1P, max 144 routes
Smart busbarInput 208/380/400/415 V AC; MCCB 160 A / 250 A; output 32 A / 1P, 40 A / 1P, 63 A / 1P, 32 A / 3P

Specifications are subject to project configuration.

Micro-modular data center DCIM dashboard with temperature, humidity, energy and alarm list

Integrated DCIM: power, cooling, environmental conditions and security.

Hot aisle containment

Separates hot and cold air streams, maximizing cooling efficiency and reducing operational cost.

  • Improved cooling efficiency
  • Reduced energy consumption
  • Stable equipment operating temperature
  • Support for high-density computing
Wizard Series

A small data hall that grows by the rack.

One integrated power cabinet (UPS, distribution and cooling) plus IT racks. Start with what the site needs today and add racks as demand grows. It connects directly to the building power supply, with N, N+1 or 2N redundancy.

Row configurations

ConfigurationTotalTypical use
1+12 cabinetsSingle-rack edge node with full power / cooling backup
1+23 cabinetsSmall branch or retail hub
1+34 cabinetsCampus or business-hall deployment
1+45 cabinetsMid-size enterprise room replacement
1+5 / 1+66–7 cabinetsGrowing regional edge site
Up to 1+910 cabinetsMaximum row configuration
N

Single UPS path

The economical baseline for standard edge sites.

N+1

Parallel modules

One redundant unit covers a failed module without dropping the load.

2N

Two power paths

Dual utility / generator feeds, ATS and UPS: no single point of failure.

≤1 day

On-site install

Pre-integrated, plug-and-play; 100% of rack space left for IT.

Technical specifications

ParameterSpecification
Enclosure42U / 47U; 600/800 × 2000/2200 × 1200/1400 mm (W × H × D)
Cabinet doorPolycarbonate door; front and rear door thickness ≥1.2 mm; side door ≥1.5 mm
Ground connectionMore than two ground points reserved; BVR 6 mm²
Air conditionerRack-mounted or in-row; cooling capacity determined according to equipment power
Emergency exhaustOne draught fan per enclosure, air volume 239–288 CFM
UPS10 kVA to 30 kVA, rack-mounted, on-line; single-in single-out or three-in single-out
Power backupLead-acid batteries or lithium battery, 7Ah / 9Ah
PDMMax 100A, 3-phase; 440 (W) × 12U (H) × 600 (D) mm; mains and UPS circuits; up to 51P air switches
Fire suppressionGas fire trace tube (optional); local light and sound warning, sent to the monitoring room or control center
Monitoring, standardTemperature & humidity sensor, door magnetic switch, smoke sensor, web monitoring
Monitoring, optional10-inch touch screen, SMS alerts, mobile app, liquid sensor, camera, access control (fingerprint, card swipe or password)
Package, per cabinet734/934 × 2200/2400 × 1368/1568 mm (W × H × D); 210–280 kg (no battery pack)
Warrior Series

The whole computer room, in one cabinet.

Power, cooling, monitoring, fire suppression and security in a single standardized enclosure, pre-installed and pre-tested at the factory. Deploys in days instead of months and is monitored centrally from day one.

ParameterSpecification
EnclosureStandard 19 in / 21 in; 600/800 × 2000/2200 × 1200/1400 mm (W × H × D)
DoorsPolycarbonate front door ≥6 mm; mesh rear door (one or two, optional) ≥1.2 mm; side door ≥1.2 mm
Precision coolingRack-mounted air conditioner, capacity 3.5 kW / 4.2 kW / 8.1 kW
Emergency exhaustOne draught fan, air volume 239–288 CFM
UPS3 kVA / 6 kVA / 10 kVA, rack-mounted with LCD screen; on-line, power factor ≥0.9
Battery packLead-acid battery, 8 × 12V 7Ah / 9Ah
PDM220V 32A / 63A input; 410 (W) × 4U (H) × 600 (D) mm; UPS input with bypass and surge protection; 22P MCB max
PDUSmart / basic; 32A input, 12× C13 and 4× C19 outputs (customized)
Fire suppressionRack-mounted gas unit, FM200 / Novec 1230; local alarm light and smoke sensor; email notification to administrator
MonitoringTouch screen VTU2.0 / VTU3.0; email alarm, temperature & humidity, smoke sensor and web monitoring as standard; point-type photoelectric water leakage detection
Access controlCard / password standard; fingerprint / face optional
Temperature & humidityPDU monitoringUPS statusCooling statusDoor access statusWater leakageSmoke detectionEmail alertsWeb monitoring
Application scenarios

Built for distributed sites.

Where a traditional server room cannot go, or is not worth building.

Telecom operators

Carrier business halls, 5G and edge network sites, edge and regional data centers.

Banking & finance

Bank branches and financial service sites; reliable infrastructure for critical services.

Enterprise

Headquarters, branch offices and mid-size enterprise room replacement.

Retail

Smart store infrastructure, local data processing and network management.

Education & campus

Campus networks and campus IT infrastructure.

Industrial edge & cloud

Smart manufacturing, edge nodes for cloud providers and healthcare facilities.

Projects

WT-MMDC in service.

Air-cooled micro-modular deployments, 20 kW – 100 kW per unit, all with 2N UPS and N+1 in-row cooling.

CountryVerticalIT capacityRacksPer rackUPSCoolingBackupConfiguration
Azerbaijan—630 kW1265 kW2NN+1 in-row15 min Li-ion7× WT-MMDC
BruneiEnergy & petrochemical240 kW803 kW2NN+1 in-row1 h VRLA5× WT-MMDC
ChinaPublic safety360 kW1203 kW2NN+1 in-row2 h VRLA3× WT-MMDC
ChinaBanking & finance224 kW1122 kW2NN+1 in-row2 h VRLA8× WT-MMDC
ChinaBanking & finance300 kW1502 kW2NN+1 in-row1 h VRLA8× WT-MMDC

Fire safety in all listed projects: FM-200 & intelligent detection.

WincoTek micro-modular data center rows installed on site

WT-MMDC rows installed on site.

Delivered

Scope in each project

Layout design, power and cooling integration, factory build, FAT and delivery. On site: installation and commissioning, followed by operation support.

Send IT load, rack count, kW per rack, climate and power supply.

We return a matched configuration with layout and lead time.

WhatsApp