WincoTek 10G SFP+ BiDi 40 km Transceiver(WTS10E4B23)
WTS10E4B23 is a 10G SFP+ BiDi transceiver for full-duplex links up to 40 km over one single-mode fiber. It is used in pairs: WTS10E4B23 transmits 1270 nm and receives 1330 nm, WTS10E4B32 transmits 1330 nm and receives 1270 nm. It suits 10G Ethernet and Fibre Channel metro and aggregation links where fiber is limited.

10G SFP+ BiDi 40 km at a glance.
Main optical, electrical and environmental values for WTS10E4B23.
| Parameter | Value |
|---|---|
| Ordering codes | WTS10E4B23-K40C / -K40I (TX 1270 nm); WTS10E4B32-K40C / -K40I (TX 1330 nm) |
| Data rate | Up to 11.3 Gb/s data links; 10.3125 Gb/s ordering rate |
| Applications (datasheet) | 10GBASE-ER/EW 10G Ethernet; 8G and 10G Fibre Channel |
| Wavelengths (TX / RX) | B23: TX 1270 nm, RX 1330 nm · B32: TX 1330 nm, RX 1270 nm (each 1260–1280 / 1320–1340 nm) |
| Laser / receiver | 1270 nm / 1330 nm DFB transmitter; PIN/TIA receiver |
| TX power (avg.) | 0 to 5 dBm |
| RX sensitivity (avg.) | −15 dBm |
| RX saturation | 0.5 dBm |
| Reach | 40 km on 9/125 µm single-mode fiber |
| Connector | LC receptacle, single fiber |
| Supply | Single +3.3 V; supply current 300 mA max. |
| Case temperature | 0 to 70 °C (-K40C); −40 to 85 °C (-K40I) |
| DDM | Yes, SFF-8472 |
| Form factor | Hot-pluggable SFP+ |
| Environmental | RoHS compliant and lead-free |
Main values for WTS10E4B23. Full WincoTek datasheet: DatasheetPDF
Used in pairs.
Each module transmits on one wavelength and receives on the other.
Order one of each.
A BiDi link sends and receives on one fiber, using two wavelengths. The two ends must be opposite halves of the same model, so order the modules as pairs in equal quantities.
Choose C (0 to 70 °C) or I (−40 to 85 °C) for each end by site. Each end can be coded for a different host platform.
Where it is used.
From the datasheet application list and common network use.
- 10G Ethernet metro and aggregation links up to 40 km on one fiber
- 8G and 10G Fibre Channel extension between sites
- Carrier access rings and backhaul where fiber pairs are limited
Related WincoTek models.
All three use the same 1270/1330 nm pair on one LC fiber. Choose by span and receiver range.
| Model | Reach | Receiver | TX power (avg.) | RX sensitivity | RX saturation | Supply current (max.) |
|---|---|---|---|---|---|---|
| WTS10L2B23 DatasheetPDF | 20 km | PIN/TIA | −3 to 3 dBm | −14.4 dBm | 0.5 dBm | 300 mA |
| WTS10E4B23 this page DatasheetPDF | 40 km | PIN/TIA | 0 to 5 dBm | −15 dBm | 0.5 dBm | 300 mA |
| WTS10E6B23(32)-K60C(I) DatasheetPDF | 60 km | APD/TIA | 0 to 5 dBm | −20 dBm | −6 dBm | 450 mA |
Full range and all datasheets: optical transceivers.
Coded to your host, tested first.
Host vendor names describe the target platform only.
Coding & compatibility
WTS10E4B23 is coded for the host platform you name, for example Cisco, Juniper, Huawei, Arista, Nokia switches and routers. We read and back up the module data, write the approved profile, then read back and verify it with DDM. Compatibility is validated per host model and software release, so we recommend testing coded samples on your equipment before a volume order.
Quality & warranty
Built in ISO 9001-certified manufacturing partners. CE, RoHS, FCC and TÜV test reports are available for each model on request.
Warranty: hardware 3 years, software 1 year.
Questions on this model.
Not answered here? Email waley@wincoteknetwork.com or message us on WhatsApp.
How is the BiDi pair made up?
One WTS10E4B23 (TX 1270 nm, RX 1330 nm) at one end and one WTS10E4B32 (TX 1330 nm, RX 1270 nm) at the other, on the same single-mode fiber.
How do I order?
Order equal quantities of WTS10E4B23 and WTS10E4B32, choose -K40C (0 to 70 °C) or -K40I (−40 to 85 °C), and name the host platform for each end.
What are the optical levels?
Average TX power 0 to 5 dBm, receiver sensitivity −15 dBm and saturation 0.5 dBm, per the datasheet.
Can I mix it with the 20 km or 60 km BiDi?
Use matching models at both ends. The 20, 40 and 60 km versions have different power and receiver ranges, so order the pair from one model.
Can it be coded for our switches?
Yes. Each module is coded for the host platform you name and verified before shipping. Test coded samples first.
Request a quote for WTS10E4B23.
Send the host model and software release, quantity and coding needs. We reply with a matched P/N and sample plan.
Email waley@wincoteknetwork.com · WhatsApp / phone +86 176 8896 6828
Optical network solutions