Home/Optical transceivers/10G SFP+ BiDi 20 km

WincoTek 10G SFP+ BiDi 20 km Transceiver(WTS10L2B23)

WTS10L2B23 is a 10G SFP+ BiDi transceiver for full-duplex links up to 20 km over one single-mode fiber. It is used in pairs: WTS10L2B23 transmits 1270 nm and receives 1330 nm, WTS10L2B32 transmits 1330 nm and receives 1270 nm. Typical uses are 10G Ethernet, Fibre Channel and CPRI fronthaul where fiber is limited.

WincoTek 10G SFP+ BiDi 20 km transceiver
Data rate
Up to 10.3125 Gb/s
Reach
20 km SMF
Fiber
1 fiber, BiDi
Connector
LC
Key specifications

10G SFP+ BiDi 20 km at a glance.

Main optical, electrical and environmental values for WTS10L2B23.

ParameterValue
Ordering codesWTS10L2B23-K20C / -K20I (TX 1270 nm); WTS10L2B32-K20C / -K20I (TX 1330 nm)
Data rateUp to 10.3125 Gb/s
Applications (datasheet)10GBASE-LR/LW 10G Ethernet; 1/2/4/8/10G Fibre Channel; CPRI rates 0.614 to 10.138 Gb/s
Wavelengths (TX / RX)B23: TX 1270 nm, RX 1330 nm · B32: TX 1330 nm, RX 1270 nm (each 1260–1280 / 1320–1340 nm)
Laser / receiver1270 nm / 1330 nm DFB transmitter; PIN/TIA receiver
TX power (avg.)−3 to 3 dBm
RX sensitivity (avg.)−14.4 dBm
RX saturation0.5 dBm
Reach20 km on 9/125 µm single-mode fiber
ConnectorLC receptacle, single fiber
SupplySingle +3.3 V; supply current 300 mA max.
Case temperature0 to 70 °C (-K20C); −40 to 85 °C (-K20I)
DDMYes, SFF-8472
Form factorHot-pluggable SFP+
EnvironmentalRoHS compliant and lead-free

Main values for WTS10L2B23. Full WincoTek datasheet: DatasheetPDF

BiDi pairing

Used in pairs.

Each module transmits on one wavelength and receives on the other.

Order one of each.

A BiDi link sends and receives on one fiber, using two wavelengths. The two ends must be opposite halves of the same model, so order the modules as pairs in equal quantities.

WTS10L2B23-K20C(I)End A: TX 1270 nm / RX 1330 nm
← one SMF →
WTS10L2B32-K20C(I)End B: TX 1330 nm / RX 1270 nm

Choose C (0 to 70 °C) or I (−40 to 85 °C) for each end by site. Each end can be coded for a different host platform.

Typical applications

Where it is used.

From the datasheet application list and common network use.

  • 10G Ethernet links over a single fiber
  • CPRI fronthaul between radio units and baseband (CPRI rates listed in the datasheet)
  • 1G to 10G Fibre Channel links
  • Access and aggregation rings where fiber pairs are limited
How it compares

Related WincoTek models.

All three use the same 1270/1330 nm pair on one LC fiber. Choose by span and receiver range.

ModelReachReceiverTX power (avg.)RX sensitivityRX saturationSupply current (max.)
WTS10L2B23
this page
DatasheetPDF
20 kmPIN/TIA−3 to 3 dBm−14.4 dBm0.5 dBm300 mA
WTS10E4B23
DatasheetPDF
40 kmPIN/TIA0 to 5 dBm−15 dBm0.5 dBm300 mA
WTS10E6B23(32)-K60C(I)
DatasheetPDF
60 kmAPD/TIA0 to 5 dBm−20 dBm−6 dBm450 mA

Full range and all datasheets: optical transceivers.

Coding, quality, warranty

Coded to your host, tested first.

Host vendor names describe the target platform only.

Coding & compatibility

WTS10L2B23 is coded for the host platform you name, for example Cisco, Juniper, Huawei, Arista, Nokia switches and routers. We read and back up the module data, write the approved profile, then read back and verify it with DDM. Compatibility is validated per host model and software release, so we recommend testing coded samples on your equipment before a volume order.

Quality & warranty

Built in ISO 9001-certified manufacturing partners. CE, RoHS, FCC and TÜV test reports are available for each model on request.

Warranty: hardware 3 years, software 1 year.

FAQ

Questions on this model.

Not answered here? Email waley@wincoteknetwork.com or message us on WhatsApp.

How is the BiDi pair made up?

One WTS10L2B23 (TX 1270 nm, RX 1330 nm) at one end and one WTS10L2B32 (TX 1330 nm, RX 1270 nm) at the other, on the same single-mode fiber.

How do I order?

Order equal quantities of WTS10L2B23 and WTS10L2B32, choose -K20C (0 to 70 °C) or -K20I (−40 to 85 °C), and name the host platform for each end.

Does it support CPRI?

The datasheet lists CPRI rates of 0.614, 1.229, 2.458, 4.915, 6.144, 7.373, 9.830 and 10.138 Gb/s, as well as 10G Ethernet and Fibre Channel.

What optical budget figures does the datasheet give?

Average TX power −3 to 3 dBm, receiver sensitivity −14.4 dBm and saturation 0.5 dBm.

Which model for longer spans?

WTS10E4B23 for up to 40 km and WTS10E6B23(32)-K60C(I) for up to 60 km, both on the same 1270/1330 nm pair.

Request a quote for WTS10L2B23.

Send the host model and software release, quantity and coding needs. We reply with a matched P/N and sample plan.

Email waley@wincoteknetwork.com · WhatsApp / phone +86 176 8896 6828

WhatsApp