WincoTek 40G QSFP+ LR4 10 km Transceiver(WTQ40L1L)

WTQ40L1L is a 40G QSFP+ LR4 transceiver for links up to 10 km over single-mode fiber. It multiplexes four 10G lanes in the 1310 nm band onto one duplex LC fiber pair and is compatible with IEEE 802.3ba 40GBASE-LR4 and SFF-8436. Typical uses are switch, router and data center interconnect links.

WincoTek 40G QSFP+ LR4 transceiver
Data rate
40 Gb/s
Reach
10 km SMF
Wavelength
1310 nm
Connector
Duplex LC
Key specifications

40G QSFP+ LR4 at a glance.

Main optical, electrical and environmental values for WTQ40L1L.

ParameterValue
Ordering codeWTQ40L1L: 4 channels, 40 Gb/s, LC, 10 km, 0 to 70 °C, with DDM
Data rate40 Gb/s; 10.3125 to 11.3 Gb/s per lane
StandardsIEEE 802.3ba 40GBASE-LR4; SFF-8436
Wavelength1310 nm (4 lanes)
TX power, each lane (avg.)−7 to 2.3 dBm; total average launch power 8.3 dBm max.
RX input power, each lane (avg.)−13.7 to 2.3 dBm; damage threshold 3.3 dBm
ReachUp to 10 km on single-mode fiber
ConnectorDuplex LC
Power dissipation3.5 W max.; supply 3.135 to 3.465 V
Case temperature0 to 70 °C
DDMYes, digital diagnostic monitoring
EnvironmentalRoHS compliant; class I laser safety

Main values for WTQ40L1L. Full WincoTek datasheet: DatasheetPDF

Typical applications

Where it is used.

From the datasheet application list and common network use.

  • 40GBASE-LR4 Ethernet
  • Switch, router and HBA links
  • Data center interconnect
  • InfiniBand QDR
  • 40G campus links
How it compares

Related WincoTek models.

The 40G QSFP+ long-reach family. For new 100G links see the 100G QSFP28 LR4.

ModelReachWavelengthsConnectorMax. powerCase temperature
WTQ40L1L
this page
DatasheetPDF
10 km1310 nmDuplex LC3.5 W0 to 70 °C
WTQ40E4
DatasheetPDF
40 km1310 nmDuplex LC4 W0 to 70 °C
WTQ40Z8
DatasheetPDF
80 kmLAN-WDM 1296–1309 nmDuplex LC5 W0 to 70 °C

Full range and all datasheets: optical transceivers.

Coding, quality, warranty

Coded to your host, tested first.

Host vendor names describe the target platform only.

Coding & compatibility

WTQ40L1L is coded for the host platform you name, for example Cisco, Juniper, Huawei, Arista, Nokia switches and routers. We read and back up the module data, write the approved profile, then read back and verify it with DDM. Compatibility is validated per host model and software release, so we recommend testing coded samples on your equipment before a volume order.

Quality & warranty

Built in ISO 9001-certified manufacturing partners. CE, RoHS, FCC and TÜV test reports are available for each model on request.

Warranty: hardware 3 years, software 1 year.

FAQ

Questions on this model.

Not answered here? Email waley@wincoteknetwork.com or message us on WhatsApp.

Which wavelengths does WTQ40L1L use?

1310 nm. Four 10G lanes are multiplexed onto one duplex LC single-mode fiber pair.

Which standard does it follow?

The datasheet states compatibility with IEEE 802.3ba 40GBASE-LR4 and the SFF-8436 specification.

What is the operating temperature?

0 to 70 °C case temperature, with 3.5 W maximum power dissipation.

What receive power range does it accept?

Average receiver input power of −13.7 to 2.3 dBm per lane, with a 3.3 dBm damage threshold.

Can it be coded for our switches?

Yes. WTQ40L1L is coded for the host platform you name and verified before shipping. Test coded samples first.

Request a quote for WTQ40L1L.

Send the host model and software release, quantity and coding needs. We reply with a matched P/N and sample plan.

Email waley@wincoteknetwork.com · WhatsApp / phone +86 176 8896 6828

WhatsApp