Home/Optical transceivers/25G SFP28 LR 20 km

WincoTek 25G SFP28 LR 20 km Transceiver(WTS25L2D(I))

WTS25L2D(I) is a 25G SFP28 LR transceiver for links up to 20 km over single-mode fiber. It transmits at 1310 nm (1260–1355 nm) and uses a PIN photodiode with TIA, rated −13 dBm, on a duplex LC connector at under 1.2 W. Use it for 25G switch, server and data center backbone links, in commercial (0 to 70 °C) or industrial (−40 to 85 °C) grade.

At a glance

Product photo on request. The full datasheet is linked below.

Data rate
25.78 Gb/s
Reach
20 km SMF
Wavelength
1260–1355 nm
Receiver
PIN
Key specifications

25G SFP28 LR 20 km at a glance.

Main optical, electrical and environmental values for WTS25L2D(I).

ParameterValue
Ordering codesWTS25L2D (commercial), WTS25L2DI (industrial)
Data rate25.78125 Gb/s; rate select via RS0 / RS1 (CDR bypass or CDR select)
StandardsSFF-8472; IEEE 802.3cc
Wavelength1310 nm; TX and RX center wavelength 1260–1355 nm
ReceiverPIN photodiode with TIA
TX power (avg.)−4 to 2 dBm; TX OMA −4 dBm min.; launch power when TX off −30 dBm max.
TX extinction ratio / SMSR3.5 dB min. / 30 dB min.; dispersion penalty (TDP) 2.7 dB max.
RX sensitivity−13 dBm
RX overload / damage threshold2 dBm / 3 dBm
LOS assert / de-assert−30 dBm min. / −17 dBm max.; hysteresis 0.5 dB min.
ReachUp to 20 km on single-mode fiber
ConnectorDuplex LC
Form factorHot-pluggable SFP28, 20-pin edge connector
SupplySingle +3.3 V ±5% (3.15 to 3.45 V); supply current 350 mA max.
Power consumption<1.2 W
Case temperature0 to 70 °C (WTS25L2D); −40 to 85 °C (WTS25L2DI)
DDMYes, SFF-8472: temperature ±3 °C, supply voltage ±3%, TX bias ±10%, TX and RX power ±3 dB
EnvironmentalRoHS compliant; storage −40 to 85 °C

Main values for WTS25L2D(I). Full WincoTek datasheet: DatasheetPDF

Typical applications

Where it is used.

From the datasheet application list and common network use.

  • 25G Ethernet links over single-mode fiber up to 20 km
  • Data center backbone and switch-to-switch links
  • High-speed server and high-performance computing cluster uplinks
  • SAN, router and load balancer connections
  • Industrial-grade (WTS25L2DI) for outdoor cabinets and sites without climate control
How it compares

Related WincoTek models.

Other 25G SFP28 options. WTS25L1D is the shorter-reach sibling for 10 km.

ModelTypeWavelengthReachKey datasheet values
WTS25SR
DatasheetPDF
25G SFP28 SR850 nm VCSEL70 m OM3 / 100 m OM4TX −8.4 to 2.4 dBm; RX sensitivity −10.3 dBm
WTS25L1D
Datasheet on request
25G SFP28 LR1310 nm, PIN receiver10 kmDatasheet on request
WTS25L2D(I)
this page
DatasheetPDF
25G SFP28 LR1310 nm (1260–1355 nm), PIN receiver20 kmTX −4 to 2 dBm; RX sensitivity −13 dBm; <1.2 W
WTS25L2B23
DatasheetPDF
25G SFP28 BiDi (pair)1270 / 1330 nm20 kmSingle-fiber alternative, used in pairs

Full range and all datasheets: optical transceivers.

Coding, quality, warranty

Coded to your host, tested first.

Host vendor names describe the target platform only.

Coding & compatibility

WTS25L2D(I) is coded for the host platform you name, for example Cisco, Juniper, Huawei, Arista, Nokia switches and routers. We read and back up the module data, write the approved profile, then read back and verify it with DDM. Compatibility is validated per host model and software release, so we recommend testing coded samples on your equipment before a volume order.

Quality & warranty

Built in ISO 9001-certified manufacturing partners. CE, RoHS, FCC and TÜV test reports are available for each model on request.

Warranty: hardware 3 years, software 1 year.

FAQ

Questions on this model.

Not answered here? Email waley@wincoteknetwork.com or message us on WhatsApp.

What fiber and connector does WTS25L2D(I) use?

Single-mode fiber with a duplex LC connector. The transmitter works at 1310 nm, with a 1260 to 1355 nm center-wavelength range in the datasheet.

What is the difference between WTS25L2D and WTS25L2DI?

WTS25L2D is commercial grade, 0 to 70 °C case temperature. WTS25L2DI is industrial grade, −40 to 85 °C. Both reach 20 km at under 1.2 W.

What optical levels does the datasheet give?

Average TX power −4 to 2 dBm, receiver sensitivity −13 dBm, overload 2 dBm and damage threshold 3 dBm.

Is there a shorter-reach or single-fiber version?

Yes. WTS25L1D is the 10 km 25G SFP28 LR (1310 nm, PIN); its datasheet is sent on request. WTS25L2B23 is a 25G SFP28 BiDi pair on 1270/1330 nm for 20 km over one fiber.

Can WTS25L2D(I) be coded for our switches?

Yes. It is coded for the host platform you name and verified before shipping. Test coded samples before a volume order.

Request a quote for WTS25L2D(I).

Send the host model and software release, quantity and coding needs. We reply with a matched P/N and sample plan.

Email waley@wincoteknetwork.com · WhatsApp / phone +86 176 8896 6828

WhatsApp