WincoTek 1G SFP BiDi 20 km Transceiver(WTS01L2B43(B34)-K20C(I))
WTS01L2B43(B34)-K20C(I) is a 1.25G SFP BiDi transceiver pair that runs a full-duplex link over one single-mode fiber up to 20 km. One end transmits 1490 nm and receives 1310 nm (B43), the other transmits 1310 nm and receives 1490 nm (B34). It suits access, enterprise and switch-to-switch links where fiber is scarce.

1G SFP BiDi 20 km at a glance.
Main optical, electrical and environmental values for WTS01L2B43(B34)-K20C(I).
| Parameter | Value |
|---|---|
| Ordering codes | WTS01L2B43-K20C / -K20I (TX 1490 nm); WTS01L2B34-K20C / -K20I (TX 1310 nm) |
| Data rate | Up to 1.25 Gb/s |
| Wavelengths (TX / RX) | B43: TX 1490 nm (1480–1500), RX 1290–1330 nm · B34: TX 1310 nm (1280–1340), RX 1470–1510 nm |
| Laser / receiver | 1490 nm DFB / 1310 nm FP transmitter; PIN/TIA receiver |
| TX power (avg.) | −9 to −3 dBm |
| RX sensitivity (avg.) | −24 dBm |
| RX saturation | 0 dBm |
| Reach | 20 km on 9/125 µm single-mode fiber |
| Connector | LC receptacle, single fiber |
| Supply | Single +3.3 V; supply current 300 mA max. |
| Case temperature | 0 to 70 °C (-K20C); −40 to 85 °C (-K20I) |
| DDM | Yes, SFF-8472 digital diagnostic monitoring |
| Form factor | Hot-pluggable SFP |
| Environmental | RoHS compliant and lead-free |
Main values for WTS01L2B43(B34)-K20C(I). Full WincoTek datasheet: DatasheetPDF
Used in pairs.
Each module transmits on one wavelength and receives on the other.
Order one of each.
A BiDi link sends and receives on one fiber, using two wavelengths. The two ends must be opposite halves of the same model, so order the modules as pairs in equal quantities.
Choose C (0 to 70 °C) or I (−40 to 85 °C) for each end by site. Each end can be coded for a different host platform.
Where it is used.
From the datasheet application list and common network use.
- Fast Ethernet and Gigabit links over a single fiber
- Router and server interfaces
- Switch-to-switch links between buildings or cabinets
- FTTx and enterprise access where fiber pairs are limited
Related WincoTek models.
All three are LC single-fiber BiDi pairs with DDM, in commercial or industrial grade.
| Model | Reach | Pair wavelengths (TX / RX) | TX power (avg.) | RX sensitivity | RX saturation |
|---|---|---|---|---|---|
| WTS01L2B43(B34)-K20C(I) this page DatasheetPDF | 20 km | B43: 1490 / 1310 nm · B34: 1310 / 1490 nm | −9 to −3 dBm | −24 dBm | 0 dBm |
| WTS01L2B53(B35)-K20C(I) DatasheetPDF | 20 km | B53: 1550 / 1310 nm · B35: 1310 / 1550 nm | −9 to −3 dBm | −24 dBm | −3 dBm |
| WTS01E4B43(B34)-K40C(I) DatasheetPDF | 40 km | B43: 1490 / 1310 nm · B34: 1310 / 1490 nm | −5 to 0 dBm | −24 dBm | 0 dBm |
Full range and all datasheets: optical transceivers.
Coded to your host, tested first.
Host vendor names describe the target platform only.
Coding & compatibility
WTS01L2B43(B34)-K20C(I) is coded for the host platform you name, for example Cisco, Juniper, Huawei, Arista, Nokia switches and routers. We read and back up the module data, write the approved profile, then read back and verify it with DDM. Compatibility is validated per host model and software release, so we recommend testing coded samples on your equipment before a volume order.
Quality & warranty
Built in ISO 9001-certified manufacturing partners. CE, RoHS, FCC and TÜV test reports are available for each model on request.
Warranty: hardware 3 years, software 1 year.
Questions on this model.
Not answered here? Email waley@wincoteknetwork.com or message us on WhatsApp.
Why are there two part numbers?
A BiDi link needs one module of each type. WTS01L2B43 transmits 1490 nm and receives 1310 nm; WTS01L2B34 transmits 1310 nm and receives 1490 nm. Install one at each end of the same fiber.
How do I order a pair?
Order equal quantities of WTS01L2B43-K20C and WTS01L2B34-K20C (or the -K20I industrial versions), and tell us the host platform for each end.
Can I use the 1550/1310 nm version instead?
Yes. WTS01L2B53(B35)-K20C(I) also covers 20 km. Its B53 and B35 halves pair only with each other; do not mix them with B43 or B34.
What power levels does the link work with?
Average TX power is −9 to −3 dBm, receiver sensitivity −24 dBm and saturation 0 dBm, per the datasheet.
Can both ends be coded for different hosts?
Yes. Each module is coded for the host platform you name, so the two ends can sit in different vendors' switches. Test coded samples first.
Request a quote for WTS01L2B43(B34)-K20C(I).
Send the host model and software release, quantity and coding needs. We reply with a matched P/N and sample plan.
Email waley@wincoteknetwork.com · WhatsApp / phone +86 176 8896 6828
Optical network solutions